Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the avia_framework domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /var/www/wp-includes/functions.php on line 6114
330XLHD – Masonry Depot New York
Masonry Depot Products
You are here: / / / / 330XLHD
330XLHD

330XLHD

CULTEC Contactor® and Recharger® septic chambers replace conventional pipe and stone or concrete leachfields. They may be installed in trench or bed configurations according to acceptance by local regulations. Contact area is maximized by the fully open bottoms, perforated sidewalls, and the use of CULTEC No. 410. Filter Fabric. Units may be configured in trench or bed installations using gravity feed or pressure distribution. Due to their greater contact area, CULTEC chambers are commonly allowed to reduce the overall system sizing requirements up to 50% when approved by the local authority.

The Recharger® 330XLHD is a 30.5″ (775 mm) tall, high capacity chamber. Typically when using this model, fewer chambers are required resulting in less labor and a smaller installation area. The Recharger® 330XLHD has the side portal internal manifold feature.

Length Width Height Storage Capacity
8.50 ft 52 inches 30.5 inches 474 Gallons

[button link=”https://masonrydepotny.com/wp-content/pdf-brochures/DRAINAGE/330XLHD,_Recharger330XLHD.pdf” text=”grey” window=”yes”]Download Brochure[/button]

Categories: ,

Description

CULTEC Contactor® and Recharger® septic chambers replace conventional pipe and stone or concrete leachfields. They may be installed in trench or bed configurations according to acceptance by local regulations. Contact area is maximized by the fully open bottoms, perforated sidewalls, and the use of CULTEC No. 410. Filter Fabric. Units may be configured in trench or bed installations using gravity feed or pressure distribution. Due to their greater contact area, CULTEC chambers are commonly allowed to reduce the overall system sizing requirements up to 50% when approved by the local authority.

The Recharger® 330XLHD is a 30.5″ (775 mm) tall, high capacity chamber. Typically when using this model, fewer chambers are required resulting in less labor and a smaller installation area. The Recharger® 330XLHD has the side portal internal manifold feature.

Length Width Height Storage Capacity
8.50 ft 52 inches 30.5 inches 474 Gallons

Reviews

There are no reviews yet.

Be the first to review “330XLHD”

Your email address will not be published. Required fields are marked *

Related products

280HD Flo-Well Dry Well